);

Polaris Series

  • Description
  • Technical Features

Description

High Pressure Misting Pump “Polaris”
These series of professional high pressure pumps are the suitable solution with high quality and safety standard for all requirements to build professional mist cooling and humidification systems with flow rates ranging from 1 up to 6 l/min with single phase electric motor. High quality components like ceramic pistons, brass head, long lasting professional seals, assure smooth operation and a long-lasting reliability.
Our built-in digital timer offers full control of the efficiency of the misting system by direct adjustment of the frequency of mist spray increasing the advantages on water and energy consumption with savings up to 70% if compared to standard systems. This pump is suitable for small and medium humidification systems thanks to the special programming of the built-in timer that allows you to set work cycles in seconds and pause cycles in minutes.
A built-in humidity and temperature controller grants a complete control on environment conditions and a quick and simple installation of humidification systems. Internal drain system BPS avoids to waste water during drain.
System Safety Control shuts down the pump in the event of the pressure dropping below 40 bar preventing flooding caused by broken tubing. It also prevents pump from dry running. A reliable solution for 24H safe operating systems QES electrical motors assure the full efficiency with lowest power consumption and low noise operation.

Pump type Flow rate Nozzles* Volt
POLARIS lpm / gpm min. / max. V-Hz
1/70 1 - 0.26 8 - 12 230-50 or 120-60
2 /70 2 - 0.53 15 - 25 230-50 or 120-60
3/70 3 - 0.78 25 - 40 230-50 or 120-60
4/70 4 - 1.06 40 - 50 230-50 or 120-60
6/70 6 - 1.59 50 - 75 230-50 or 120-60

Available as "STANDARD" and "HT" (with built-in hygrostat and thermostat) versions.
* 0.008" Nozzles (0.20 mm)